Vortex Technology
Vortex technology automatically separates the usable abrasive from the unusable abrasive, maximizing the recycle
rate of your blasting media.
During blasting, Vortex sends the abrasive into an airwash, which automatically filters the finest dust
particles and debris from the usable abrasive. The dust and debris are directed into the HEPA filtration system,
ultimately ending up in the disposable liner; the usable abrasive is redirected back into your system for
reuse.
Pressure Pot
This 50 lb., ASME-certified pressure vessel houses the abrasive. It automatically filters out debris to prevent
clogging. Our exclusive 45 degree angle design allows for a more consistent sandflow.
Premium Dust Filtration System
This exclusive, built-on dust filtration system incorporates a mechanical shaker to protect you from exposure to
airborne dust while you are sandcarving, and even during maintenance dust removal. The dust filtration system
efficiently separates the worn abrasive using eleven woven polyester, HEPA filtration Teflon bags. The unusable
abrasive is then emptied into the clear disposable liner.
HEPA Filtration
The Premium Dust Collector incorporates 15 sq. ft. of efficient HEPA filtration and separation. Built-in HEPA
filtration allows for separation and capture of 99.7 of the dust particles as you are sandcarving. As a result,
your sandcarving work area remains cleaner at all times.
Clear Disposable Liner
This accessible, removable clear liner stores your unusable abrasive until you are ready to throw it out. The
clear liner is attached to the lower chamber of the Premium Dust Filtration System; because the bag is transparent,
you can easily see when it needs to be emptied.
1/3 Horsepower High Efficient Motor
The 1/3 horsepower, low maintenance motor optimizes the output of your sandcarving system. This powerful, 400
plus CFM, 115 volt motor will withstand years of operation.
Ergonomic Cabinet Design
The cabinet design follows the contours of your natural position while sandcarving, which allows you to work
comfortably and more productively.
Seam-welded/Powder-coated
The system is built to last for years, with total seam-welded, 14 gage steel construction and a epoxy
powder-coated finish. The epoxy powder-coated finish resists rust as well as chips, scratches and wears better than
other types of finishes.
Gloveless Sleeves
The large gloveless sleeves are made of a lightweight polyurethane, for easy mobility and handling of your
products while sandcarving.
Padded Arm Rests
The padded arm rests prevent stress to your forearms and provide added comfort while sandcarving.
Dual Recessed Halogen Lights
The dual recessed halogen lighting provides the brightest lit sandcarving workspace on the market.
Oversized Viewing Window
The oversized laminated safety glass provides superior visibility while sandcarving. The oversized viewing
window can easily be replaced.
Full Size Dual Door Entry
The double-door entry provides easy access from both sides of the cabinet, and a large unrestricted space for
moving the items in and out.
Wheels
Locking wheels give you the flexibility to move your system when required.
Foot Switch Valve
This new footswitch valve provides longer performance and is very low maintenance in comparison to the former
footswitch valve. It also optimizes air and sand flow to your hoses.
Heavy Duty Blasting Hose
The 10 ft. heavy duty hose is flexible and provides adequate sand flow and longer blasting usage.
Right and Left Hose Holes
The blasting hose can be used from the right or left side, so the system is as convenient for left-handed
sandcarvers as it is for right-handed sandcarvers.
Carbide Nozzle
The durable 3/32-inch carbide nozzle is versatile and easy to use for any sandcarving project. It comes with an
adapter and O-ring.
Pressure Regulator/Water Separator
This unit regulates the amount of air pressure and sand flow (PSI) being sent to your blasting hose/nozzle and
efficiently separates the water content. We have combined the two functions into one unit to minimize space.
Standard features include an auto-relieving moisture drain to remove water drops and oil from compressed air, a
push-down locking adjustment knob to change pressure settings, pressure gauge, liquid level indicator and manual
relieving valve.
Exclusive Air Curtain
The Exclusive Max Flow Air Curtain directs air across your viewing window to remove dust and ensure maximum
visibility while sandcarving. This process is made possible by a vent above the viewing window. Also, helps prevent
dust and overspray to your viewing window.
Warranty
Rayzist guarantees that our sandcarving systems are built to last.
- Lifetime warranty on cabinet construction
- 1-year warranty on the motor
- 90-day warranty on water separator/regulator
- 90-day warranty on foot pedal, foot switch valve and heavy duty blasting hose
| 
